The Honda S2000, with its high-revving VTEC four-cylinder engines, is one of the most fascinating vehicles from Japan. Now, the ST coilovers, manufactured in OEM quality, are available for all S2000’s, including the local versions (Type S, GT, Club Racer and facelift models), as well as the versions with 2,2-liter four-cylinder (F22C1).
For Honda S2000 drivers who want to get the full potential out of their sporty roadster, ST suspensions has developed the ST XTA coilovers with Aluminum Unibal top mounts. It is the ideal performance tool for the road.
With the damper technology utilized, it is easy to adjust the ST XTA dampers on request to make the ride more sporty or more comfortable.
A Honda S2000 equipped with an ST suspensions coilover kit takes every curve more direct and holds firmly to the road. Bumps and typical transverse joints for bridges are damped easily by the ST suspensions kit.
The old stigma of a coilover being uncomfortable no longer holds true with the high quality ST coilovers. Often times it may be true that the suspension travel can even be longer than the stock suspension when the vehicle is lowered 30mm with the ST suspensions kit. This leaves enough travel for proper suspension articulation which allows for more driving comfort. The coilover kit provides a tested lowering of 55 mm.
The continuously adjustable range covered by the approval certificate is between 25 and 55 mm for both ST X & ST XTA coilover kits.
By request, the performance of the ST coilovers for the Honda S2000 may further be increased by the installation of ST wheel spacers (bolt circle 5×114,3). The ST DZX wheel spacers with multi hole circle bores enable you to widen the track per wheel in 2.5 mm-steps from 5 to 25 mm.
With the ST AZX wheel spacers, a wider track of 25 to 35 mm can be reached in 5 mm steps. Mounting note: the Honda S2000 has different hub centerings at the front and rear axle. For further information please visit www.st-suspensions.net