Automechanika 2016: ST suspensions Wheel Spacers Revolution

2016-05-24-PHOTO-00000037-e1464081918682

From September 13th – September 19th ST suspensions is showcasing at the Automechanika Frankfurt (Booth No. B70, Hall B3 Level 1). Be our guest and leran how ST suspensions revolutionise the automotive aftermarket and tire trade with its innovative wheel spacer systems AZX and DZX.

Expensive stock keeping is out of date now! With only 36 sets of spacer discs, 45 ST adapter rings and innovative mounting material over 19.000 combinations are possible!

low_ST_SpVb-DZX_VW_T6

It is irrelevant if the car is equipped with wheel hubs using stud bolts or wheel hubs in combination with wheel bolts! Through our multiple bolt pattern bores up to twelve bolt circles per DZX spacer can be covered. This is how we are able to cover all 4-, 5- and 6-hole bolt circles from 4×98 to 6×132. Combining our DZX spacers with our patented adapter rings innumerable cars using wheel bolts can be served. By the use of our new ST shank nuts nothin stands in the way of an installation to any car with stud bolts anymore. Since DZX spacers are available from 5 to 25mm per wheel in steps of 2,5mm an extension of track between 10mm, 15mm, 20mm, 25mm, 30mm, 40mm, 45mm and 50mm per axle can be realized.

ST_SpVb-AZX_DZX_Image_010-e1448539391408

Our new AZX spacer discs are available of the most common bolt circles (5×108, 5×110, 5×112, 5×114,3, 5×120 and 5×127) and the sizes of the spacers from 25mm, 30mm and 35mm  allow track extension of 50mm, 60mm and 70mm per axle.

By the use of our new ST shank nuts nothing stands in the way of an installation to any car with stud bolts anymore. We are looking forward to welcome you at the AUTOMECHANIKA Frankfurt in the VDAT area in Hall B3 Level 1 (Booth No. B70).

Related Posts