Over 1,100 hp in the rear-wheel-drive drift Corolla with ST XTA plus 3 coilovers!

One-piece Störm forged alloy wheels with wide semi-slick tires on a modified Toyota GR Corolla
The one-piece Ström forged wheels are fitted with Accelera 651 Sport Pro semislicks in 235/40R18 and 265/35R18

The Toyota GR 86, Toyota GR Yaris and now the Toyota GR Corolla prove it: Toyota simply thinks of everyone who sees more in a car than just getting from A to B. The Japanese manufacturer still seems to be one of the last true petrolheads in the industry.

Wider, more brutal – more Baggsy!
This is what 1,115 hp and 798 Nm look like in a Toyota GR Corolla

Just how much drift potential is packed into the Toyota GR Corolla (unfortunately not offered in Europe) is demonstrated by our ST brand ambassador Steve “Baggsy” Biagioni. Over the past winter months he transformed the GR he presented at the Essen Motor Show 2025 into a brutal drift machine and let it off the leash for the first time at the Goodwood Festival of Speed in early summer 2026.

Wider, more brutal – more Baggsy!

All-wheel drive and standard engine were removed from the GR Corolla
From new car to drift project: Baggsy really went all-in

Barely back in the UK from the Essen Motor Show, Baggsy’s GR was stripped down to its individual components and the radical drift conversion began. The all-wheel-drive system and the 1.6-litre three-cylinder turbo engine went into the parts bin, and Baggsy’s team at SB Motorsport attacked the Corolla’s bodywork with angle grinders and welding equipment.

The Toyota became a major construction site. A certified safety cell including a roll cage from SW Motorsports was welded into the bare shell. In addition, the entire body was stiffened, the transmission tunnel adapted and all subframes modified.

View into the engine bay of the GR Corolla with Supra engine
You can follow the complete build of the GR Corolla on Baggsy’s YouTube channel

Literally not one bolt remained untouched in the engine bay. The slam panel was even removed, and the front wings and bulkhead received the angle-grinder-and-welder treatment. Baggsy and his team squeezed a big six-cylinder from the Toyota Supra Mk4 into the GR Corolla!

Forge Motorsport intercooler in the GR Corolla
The massive intercooler from Forge Motorsport sits on the custom-fabricated slam panel

The 2JZ is a fully rebuilt engine by DY Engine Services whose entire internals were replaced with hardware from JDM Garage. The intercooler circuit and intake manifold are a combination of components adapted by Forge Motorsport, Funk Motorsport and Walton Motorsport.

Garrett G40-1150 in Baggsy’s GR Corolla
The Garrett turbo delivers serious boost to the 2JZ engine

After all, Baggsy needs plenty of power for drifting. Thanks to the bolted-on Garrett G40-1150 turbo and the Turbosmart PowerGate 60 wastegate, the installed Supra engine puts a solid 1,115 hp and 798 Nm into the sequential Quaife 69G six-speed gearbox. Brutal, right?

To make sure the combustion chambers always have enough race fuel (Sunoco E85R), fuel delivery is handled by a Radium Engineering tank system with a high-performance fuel pump and ASNU 1,650 cc injectors. The pure power delivery is monitored by Link FuryX and ECU Master PMU-24-DL control units.

100 % rear-wheel drive and the perfect suspension setup for drift angle

Sikky x Winters rear axle differential
If the differential ever needs changing, it can be swapped relatively easily

To stop the 798 Nm of torque from destroying the rear axle differential, SB Motorsport fitted a Sikky x Winters differential. If it develops “toothache”, the differential can be replaced quickly.

TRA Kyoto Rocket Bunny Pandem widebody aerodynamic kit on the Toyota GR Corolla

For maximum steering lock the entire suspension was modified, and thanks to the FDF Racershop kit the angle is well beyond 40 degrees. In the competitive drift scene, 40 to 60 degrees is the standard.

Although the Toyota GR Corolla is only available in Australia, Japan, Canada, New Zealand and the USA, we offer our ST XTA plus 3 coilovers for the all-wheel-drive compact sports car. And this is exactly the suspension fitted to Baggsy’s drift GR!

ST XTA plus 3 coilovers for Toyota GR Corolla
The ST XTA plus 3 coilovers are available for more and more vehicles

Okay, we adjusted the valving and spring rates of the triple-adjustable XTA plus 3 a little, because despite the different gearbox and the big six-cylinder the drift Toyota is lighter than a standard GR Corolla.

XTA plus 3 landing page

Most of us will never turn our Toyota into a brutal drift machine, but anyone who wants to go a bit more sporty should take a closer look at our ST XTA plus 3 coilovers.

XTA plus 3 damper setup
Every ST coilover set comes with a setup guide

There is more scope to turn your car into an uncompromising corner carver without major effort. We supply the suspension with motorsport springs and, on the front axle, with uniball-mounted aluminium top mounts. Like the KW V4 and KW V4 Clubsport coilovers, the dampers can be adjusted separately in high-speed compression, low-speed compression and low-speed rebound.

Generic characteristic curve representation of the XTA plus 3 in compression
Generic characteristic curve illustration of the XTA plus 3 in compression

Every click corresponds to a different setup: turning the adjustment wheels changes the valve openings or the valve spring preload in the valves, selecting a different characteristic curve. Low-speed and high-speed compression can each be adjusted in 24 clicks, low-speed rebound in 16.

Function of the rebound valve

Rebound influences, among other things, how the suspension rebounds from the compressed state during load changes. Compression, together with the spring rate, determines the immersion speed of the piston rod and also affects pitch and roll movements of the body as well as turn-in behaviour.

Functions of the XTA plus 3 compression valve

On performance suspensions such as the ST XTA plus 3 coilovers, low-speed and high-speed refer to the speed of the piston rod movement during compression and rebound. Slow piston rod movements occur during typical steering inputs such as braking into corners; fast ones are caused by road irregularities such as bumps and transverse joints.

Theo Bodry’s E46 BMW with XTA plus 3 coilovers while drifting

For example, Theo Bodry equipped his BMW E46 with a 2JZ engine and ST XTA plus 3 and finished third in the AvD Drift Championship 2026 with 43 points!

Toyota GR Corolla trimmed for lightweight construction with carbon
The Seibon doors, like the bonnet and roof, are made of lightweight carbon fibre.

Carbon styling and more

TRA Kyoto Rocket Bunny Pandem kit

The drift Corolla was properly dressed with a TRA Kyoto Rocket Bunny Pandem kit including widebody fenders, skirts, splitters, side skirts and rear wing.

Throwback SEMA Show 2015: Kei Miura (centre) in conversation with Aki Hashimoto of KW automotive Japan and Sidney for a Rocket Bunny Golf project

Even after the hype of more than ten years ago, Japanese widebody pope Kei Miura of TRA Kyoto is still very much in business. He produces body kits for numerous popular vehicles. He also works closely with Akira Nakai and Wataru Kato, who commission him for their body kits.

Kei Miura appears to have taken a little inspiration from the Toyota GR Yaris WRC cars for his Corolla kit. Inside the wide wheel arches turn custom one-piece Ström forged wheels in 18 inches with Accelera 651 Sport Pro semislicks in 235/40R18 and 265/35R18. An EBC brake system sits behind the spokes.

Safety cell with side impact protection and adapted steering column
The best office in the world: the cockpit of a drift machine

Inside the stripped interior things are spartan, with only functional motorsport equipment on board. Particularly nice to look at is the adapted and extended steering column, so that Baggsy can sit strapped into his Sparco full bucket seat roughly at the height of the B-pillar.

Things are spartan in the passenger compartment of the drift Corolla
It’s spartan in the passenger compartment

Fortunately there is still a second seat so a passenger can ride along. To shed a few more kilograms, all the glass has been replaced with Makrolon windows.

The TRA Kyoto Rocket Bunny Pandem kit including fender flares, skirts, splitters, side skirts and rear wing costs around 7,000 euros
All the windows have been replaced with Makrolon

The Seibon doors, like the bonnet and roof, are made of lightweight carbon fibre. Seibon carbon fenders also sit under the bolted-on Pandem widebody extensions.

Toyota GR Corolla with TRA Kyoto Rocket Bunny Pandem widebody kit
The exhaust ends just after the turbocharger, exiting directly through the Seibon bonnet

In Europe, Baggsy’s Corolla is one of the first of its kind, and our brand ambassador even let the community have a little say in the build of his drift machine. In a collab post he asked whether the exhaust should exit as a sidepipe or straight out of the bonnet – to Baggsy’s delight the social-media followers chose the bonnet.

You can watch the entire build of the Toyota GR Corolla again on Baggsy’s YouTube channel. Maybe Baggsy will also let his 1,115 hp GR off the leash at the Tuning World Bodensee one day.

Photos: SB Motorsport

Related Posts